Kofax 
Document Scan Server (DSS)

Date	: March 13, 2007
Version	: Panasonic KV-S1025C Scanner Driver v1.40.023
Notes	: This release includes the following file: 
          Driver_Panasonic_paseries_1.40.023.drv
		 
	  The driver is compatible with the DSS Utility v1.40.023 and 
          the DSS Management Console v1.40.006.

Description
------------------------------------------------------------------------------
This release of the Panasonic pa-Series scanner driver provides support of the 
Panasonic KV-S1025C scanner with the Document Scan Server.


------------------------------------------------------------------------------
Note 
As a feature of the Panasonic KV-S1025C scanner, the Error LED on the
scanner starts to blink following a predefined number of consecutive scans 
(such as 2,000) to notify you of one of the following actions: 
clean the roller, replace the paper feed roller, or replace the double-feed 
prevention roller.

To determine the action required and to clear the error, you need to connect
the scanner to your computer and run the scanner User Utility. The User 
Utility is provided on the drivers and utilities CD that accompanies the 
scanner.

------------------------------------------------------------------------------
Workaround for clearing the error
If you want to avoid connecting the scanner to your computer and do not need
to determine the specific action required, you can clear the error by using
three custom scan profiles provided by Kofax specifically for this purpose. 
The scan profiles are:
- Panasonic_KV-S1025C_CleanRoller.ssp
- Panasonic_KV-S1025C_ReplacePFRoller.ssp
- Panasonic_KV-S1025C_ReplaceDFRoller.ssp

The custom scan profiles are listed in the order for which action is more 
likely to be required for your scanner error. When using the workaround, 
you can use each custom scan profile in turn until the error is cleared.

To use the workaround
1. Download one, two, or all three of the custom scan profiles from the 
   Kofax Web site.
2. Import one, two, or all three of the custom scan profiles to your 
   Document Scan Server.
3. Scan a document using one of the scan profiles. (A single scan is
   sufficient.)
4. Repeat Steps 1 through 3 as needed for each of the scan profiles, until 
   the error is cleared.
5. Remove the custom scan profiles from the Document Scan Server.
   Note: This step is highly recommended. If the custom scan profiles are not
   removed, the error will continue to be cleared each time one of the
   following occurs: a document is scanned, the Document Scan Server is 
   restarted, or the scanner is disconnected and reconnected. The repeated
   clearing of the error may produce undesirable results with your 
   Document Scan Server.