Document Scan Server – Standard Kofax Errors
0	No error.
1	General failure.
2	Feature not yet available.
3	Access violation.
4	Internal data structures corrupted.
5	Image already opened.
6	Image not opened.
7	Cannot open image.
8	Image already exists.
9	No memory available.
10	Failed to lock or free memory.
11	Read-only attribute.
12	File read error occurred.
13	File write error occurred.
14	Bad image header found by filter.
15	Bad image position requested.
16	Invalid descriptor or spec handle.
17	Image descriptor is corrupted.
18	Scan or print spec is corrupted.
19	End of image detected.
20	End of tile or strip detected.
21	User band source exhausted.
22	Error in compressed data.
23	HWND parameter not supplied.
24	Bad parameters.
25	Invalid parameter ID specified.
26	Invalid parameter value specified.
27	User buffer too small.
28	Timeout (engine, device, or KIPP).
29	Engine driver not found.
30	Engine failure.
31	No expanded memory manager.
32	Expanded memory manager error.
33	Device not capable.
34	Device power off.
35	Device not ready.
36	Device low on toner.
37	Device is out of paper.
38	Device paper jam.
39	Stop button pushed on device.
40	Unspecified device error.
41	Device already reserved.
42	Device not configured.
43	Device data overrun.
44	Device data underrun.
45	Display context is corrupted.
46	Operation not allowed while scanner is in use.
47	Driver error.
48	Semaphore failure.
49	Image width too small or too large.
50	No adaptor memory available.
51	Requested engine is busy (locked).
52	User canceled operation, e.g. using ESC.
53	Operation/action aborted.
54	KIPPOpen() never called.
55	Display (e.g. BLT) failed.
56	Insufficient image memory.
57	No DPI specified.
58	Disk or directory is full.
59	Debug mismatch among source files.
60	Version mismatch among libs.
61	No BIC.CFG was found.
62	Specified resource does not exist.
63	Unknown KRI_xxx identifier.
64	BLACKG3.DAT and/or WHITEG3.DAT missing.
65	Invalid KSP_* or KSC_* identifier.
66	Invalid KPP_* or KPC_* identifier.
67	Invalid scan/print DPI setting.
68	Invalid scan/print PaperSize setting.
69	Invalid scan Intensity setting.
70	Invalid scan Contrast setting.
71	Invalid scan/print PaperSource setting.
72	Invalid scan Stacker setting.
73	Invalid scan/print Color setting.
74	Invalid scan/print Bitsex setting.
75	Invalid scan ScanMode setting.
76	Invalid scan StartMode setting.
77	Invalid print PaperDest setting.
78	Invalid print Duplex setting.
79	Attempt to scan duplex without slave.
80	Line too wide to handle.
81	Invalid print tray.
82	Invalid parameter combination.
83	End Of File reached.
84	KIPPERRS.TXT error file not found.
85	Cannot scan front-only in duplex mode.
86	Operation output was truncated.
87	Unexpected KRI_xxx identifier.
88	Image truncated.
89	ADF is present.
90	Invalid dither setting.
91	Invalid jog position.
92	Invalid foot switch.
93	Job separator not supported.
94	Long scan not supported.
95	Bad width and/or length.
96	Bad paper source/paper size combo.
97	Bad paper source/panel combo.
98	Bad paper size/orientation combo.
99	Bad paper size/DPI combo.
100	Bad paper source/orientation combo.
101	Bad squeeze setting.
102	Bad paper source/long scan combo.
103	Bad orientation/long scan combo.
104	Bad stacker/jog position combo.
105	Bad orientation.
106	Reserve failed.
107	KOFAX.INI not found.
108	Invalid pointer detected.
109	Invalid toolkit edition.
110	Sequencing error.
111	Resource already opened.
112	Resource not reserved.
113	Unknown message.
114	Task list full.
115	No mail messages available.
116	Peripheral out of toner.
117	Bad picking rect specified.
118	Bad contrast/scan mode combo.
119	Peripheral fuse blown.
120	Peripheral optics malfunction.
121	Peripheral mechanical malfunction.
122	Peripheral cover open.
123	Peripheral has no endorser.
124	Endorser error.
125	Invalid endorser string.
126	Peripheral electrical malfunction.
127	KIPP/STGFLT DLL version mismatch.
128	KIPP/APPLIB DLL version mismatch.
129	Windows print error with software engine.
130	Scanner is in invalid state.
131	Scanner calibration problem.
132	Scanned image length mismatch.
133	Communication error.
134	Bad file specification.
135	File was not found.
136	File format not recognized.
137	Storage filter not loaded.
138	Bad storage filter ID.
139	Image compression format mismatch.
140	Scanning stopped by patchcode.
141	Patchcode trigger detected.
142	KOSSeek failed.
143	Cannot read less than one line.
144	Compressor failed.
145	Callback was not supplied.
146	GDI Palette error.
147	Unsupported bits/sample.
148	Unsupported samples/pixel.
149	KSM : Invalid state.
150	KSM : State already exists.
151	KSM : Too many states.
152	KSM : Transition already exists.
153	KSM : Invalid transition.
154	KSM : Too many transitions.
155	Operation not complete.
156	Operation complete.
157	Unsupported color format.
158	Bad parameter index.
159	Bad color or bitsex.
160	GDI call failed.
161	Width not 8-bit aligned (CALS).
162	Invalid page number in document.
163	ADF miss pick.
164	ADF error.
165	Scanner not ready.
166	No scanner.
167	Unknown error from BIC.
168	Self-test failed.
169	Untranslated BIC loader error.
170	Untranslated BIC LCA error.
171	Untranslated BIC compression error.
172	Untranslated BIC printer error.
173	Untranslated BIC scanner error.
174	Untranslated BIC SCSI error.
175	Untranslated BIC OS error.
176	Untranslated BIC kernel error.
177	Untranslated BIC kernel error.
178	Untranslated MBS error.
179	Bad I/O port.
180	Bad INI section.
181	Bad INI entry.
182	Missing INI entry.
183	Cannot open file.
184	Engine boot failure.
185	Stacker full.
186	Missing SCSI module.
187	Unknown peripheral make.
188	Unknown peripheral model.
189	Bad communication port.
190	Unknown board types.
191	Unknown cable ID.
192	Bad panel start.
193	Bad dither combo.
194	Bad foot-switch/paper combo.
195	Bad color/dither combo.
196	Bad format in INI file.
197	Expected different daughter card.
198	Bad unit type (KFUNIT).
199	Bad rotation/long scan combo.
200	Bad image processing options/long scan combo.
201	Bad source alias.
202	Bad source type.
203	No source available.
204	MASTER/SLAVE Board type mismatch (slave must be >= master).
205	MASTER/SLAVE Board memory size mismatch.
206	Feature or property obsoleted.
209	Invalid HW REE data.
210	ISIS scanner error.
211	No ISIS permissions for scanner driver.
212	Missing PIXDFLT.DLL.
213	1 or more entry points in pixdflt not found.
214	PXW scanner driver not found.
215	Cannot locate SCSI device.
216	Scanner not responding.
217	Untranslated ISIS error.
230	Copy protection (time lock) expired.
231	Missing copy protection information.
232	Feature not supported by source.
233	Duplex not supported by this flatbed scanner.
234	No ASPI driver loaded for ISIS.
235	User hit cancel on trial dialog -- restart app to use engine.
236	Incorrect scanner make loaded on board.
237	Incorrect scanner model loaded on board.
250	Bad function/sensitivity BH ACE combo.
251	Incompatible barcode types selected.
252	Bad password provided.
253	Bad zoom/dpi combination.
254	Scanner stopped sync.
255	User not licensed for this feature.
256	PIE: Engine not responding.
257	PIE: Invalid command.
258	PIE: No resources.
259	PIE: Invalid argument.
260	PIE: Resource does not exist.
261	PIE: Operational error.
262	PIE: Source reservered.
263	PIE: Cannot abort.
264	PIE: DSP failed diagnostics.
265	PIE: DSP program failure.
266