Adrenaline
EH-850/EH-1700 SCSI & Video Interface Board's AHRT 3.65 Patch
Downloads LibraryThough this Adrenaline Hardware Runtime (AHRT) 3.65 product, for the Adrenaline EH-850 and EH-1700 SCSI and video interface boards, is no longer supported, the support Web pages for this product will continue to be available until 06/30/06.
The latest version for the Adrenaline EH-850 and EH-1700 SCSI and video interface board's Adrenaline Hardware Runtime (AHRT) product is 3.75 .
The following patches may be required when using the Adrenaline EH-850 and EH-1700 SCSI and video interface board's Adrenaline Hardware Runtime (AHRT) 3.65 product.
These patches should only be applied as described below to avoid difficulties.
| Patch/Driver |
File/Size | Details |
|---|---|---|
| Adrenaline 3.65.60 Patch | IC36560Update.exe |
The Adrenaline 3.65.60 patch can be installed over any AHRT, AIPE, or Adrenaline 650i installation utilizing AIPE/AHRT version 3.65.38 or later. This patch also applies to the runtime supplied with the Adrenaline 450, 650, and 650i boards. Please refer to the installation instructions included with the Adrenaline 3.65.60 Patch Release Report (133 KB). |
The following scanner specific patches may be required when using the Adrenaline EH-850 and EH-1700 SCSI and video interface board's Adrenaline Hardware Runtime (AHRT) 3.65 product.
These scanner specific patches should only be applied as described below to avoid difficulties.
|
Patch/Driver |
File/Size | Details |
|---|---|---|
| Adrenaline TWAIN Data Source version 1.62 | ATDS16209.exe
|
For Adrenaline Hardware EH-450, EH-650, EH-650i EH-850,
EH-1700 boards Note to TWAIN users: Click here to download this TWAIN Data Source Getting Started Guide. Released on 05/02 |
| B+H 8000 SCSI Endorser Support | BH8000SCSI.exe |
This updated driver addresses only the ability to provide ImageControls programmatic control over the imprinter on the Bell+Howell 8000 Series SCSI scanners. Released on 11/15/01 |
| Kodak Diag. Patch | kodkdiag1028.exe |
This patch allows the Kodak supplied diagnostics utility to communicate with the Kodak Mid-Volume Scanners DS-3500, DS-3510 DS-3520, DS-3590c and DS-4500 scanner when using Adrenaline EH-850 and EH-1700 SCSI or video interface boards. Released on 05/18/01 |
| Kodak MV (35x/4500) scanner patch | This patch allows reducing the time that the transport runs when using the Kodak 35XX and 4500 scanners. Minimum runtime version for this patch is AHRT 3.65B. Once installed the reported runtime version will be 3.67.29 after installing this patch. Note
about time-outs
: |
|
| Kodak i810/i830 w/Adrenaline 650/650i patch | i810Update.exe |
This
patch applies to the Adrenaline 650/650i runtime when
using the Kodak i810 or i830 scanner only. This patch
allows the proper setting on contrast values. |
| Kodak 3590C improved color patch code patch | kdk35xx_4.exe |
This
patch improves the color patch code recognition when scanned
on a Kodak 3590C scanner at 150 dpi. |
| Kodak DS5500, DS75XX, or DS95XX brightness/contrast patch | Kodak_HV |
This
patch properly enables control over the brightness and
contrast settings when using Modes 9 or greater with the
Kodak DS5500, DS75XX, OR DS95XX High Volume scanners. |
| Fujitsu IPC Patch | FujistsuSCSI.exe |
This updated driver improves IPC support with the Adrenaline 850 and 1700 Image Processing Accelerators. |
| Fujitsu M4099D endorser patch | Fujitsu
M4099D |
This patch adds certified support for the 24-bit endorser and improves scanner performance. |
| Fujitsu M4099D 24-bit endorser support patch | This
patch adds certified support for the 24-bit endorser and
improves scanner performance. |
|
| Fujitsu fi-4640 850/1700 support patch | Fujitsu
fi-4640 |
This scanner is now certified with the Adrenaline 850 and 1700 Image Processing Accelerators. |
| Kodak High Volume Mode 9 patch | ||
| Kodak 3590C patch | Kodak
3590C |
This
patch improves the color patch code recognition at 150
dpi. |
| Kodak Transport Time-Out Patch | This
patch allows reducing the time that the transport runs
when using the Kodak 35XX and 4500 scanners. Minimum runtime
version for this patch is AHRT 3.65B. Once installed
the reported runtime version will be 3.67.29 after installing
this patch. Note about time-outs : The Kodak MV Scanners have a minimum transport time-out value of 3 seconds, the default transport time-out value is 8 seconds. When using an Adrenaline Hardware runtime, setting the time-out value to 1 will set the minimum transport time- out. In this case 3 Seconds plus 1 Second. |
|
The Kofax Adrenaline Technical Support group is skilled in all aspects of PC hardware compatibility, including Kofax controllers and drivers, SCSI adapters, and ISIS and TWAIN drivers.
Use the following options to contact the Adrenaline Technical Support group.
Use the menu options on the upper left side of this Web page to access additional Adrenaline product support options.
