Kofax Transformation Modules 4.0 (KTM) Frequently Asked Questions

Kofax Transformation Modules 5.5.2 (5.5 with Service Pack 2) is the latest release of the Kofax Transformation Modules product.

Please note: Prior to applying any Service Pack, Fix Pack, or Fix to your Kofax Transformation Modules 5.5 product, please be sure you have installed Kofax Transformation Modules 5.5.0 R2 or later . KTM 5.5.0 initial release installations cannot be upgraded with the current 5.5.1 Service Pack, Fix Packs, or Fixes. Refer to the Kofax Transformation Modules 5.5.0 R2 Product Information and Installation Instructions document for details.

To access the following Web pages for this release, please click on the desired page's link.

Application Notes - Frequently Asked Questions - Revision Levels  - Supported Configurations

Kofax Transformation Modules 4.0 Questions

1. What new features are found in the Kofax Transformation Modules 4.0 product?

2. What does the Kofax Transformation Modules 4.0 product install?

3. Are there any important installation notes that should be considered before installing the Kofax Transformation Modules 4.0 product?

4. Are there any additional setup steps for the Kofax Transformation Modules 4.0 product that I need to be aware of?

5. How do I register Custom Modules or Release Scripts for use with the Kofax Transformation Modules 4.0 product?

6. How can I access the online help in the Kofax Transformation Modules 4.0 product?

If the FAQs below do not provide you with the information you need, please visit our Capture, Transformation & VRS Products Knowledge Base to search for the information.

General Kofax Transformation Modules 4.0 Questions and Answers

1. What new features are found in the Kofax Transformation Modules 4.0 product?

The following new features have been added to Kofax Transformation Modules 4.0.

• Multiple Instances of Server
• Multiple Steps of Validation
• Masked Areas in Validation
• Trainable Group Locator
• Specific Online Learning for Tables
• Kofax Transformation Modules - Correction
• Kofax Transformation Modules - Verification
• Kofax Transformation Modules - Document Review
• SQL Server Support for Statistics Release

For additional information about the above Kofax Transformation Modules 4.0 product's new features, please refer to the New Features section beginning on page 1 of the Kofax Transformation Modules 4.0 Release Notes document.

2. What does the Kofax Transformation Modules 4.0 product install?

The Kofax Transformation Modules installation program installs and registers several components:

Tools:
Component	Description
Kofax Transformation - Project Builder	A configuration tool that is used to develop, train, and test Kofax Transformation Modules configurations.
Kofax Transformation - Project Planner (Professional Add-on license only)	A configuration tool that is used to manage document sets and configure trainable document separation.
Kofax Transformation Modules - Synchronization	A setup component that is integrated into the Kofax Capture Administration module as a custom panel. It is used for linking Kofax Capture document classes and index fields to classes and fields in the Kofax Transformation project and is installed with Kofax Transformation Modules - Server.
Kofax Transformation - Knowledge Base Administration	A configuration tool that is used to create and maintain extraction Knowledge Bases.
Kofax Transformation - Service Configuration	A configuration utility that is used to set up and change settings for the Kofax Transformation Modules - Batch Processing Service and the Kofax Transformation Modules - Knowledge Base Learning Service. It is installed with Kofax Transformation Modules - Server.
Kofax Transformation - Statistics Viewer	A tool that is used to monitor classification and extraction performance.
Kofax Transformation - XDoc Browser	A tool that is used to view and analyze extracted data within XDocs.
Kofax Transformation - OCR Server	A tool that is used to quickly create XDocs from batches of images to expedite configuration.
Kofax Transformation - Image Classifier	A tool that is used to quickly test image classification on large numbers of images.
Modules
Kofax Transformation Modules - Server	A module that automatically separates a batch into documents and then classifies and extracts information from each document. It also groups documents into folders based on common features if foldering is enabled.
Kofax Transformation Modules - Document Review	A user interactive module that is used to review batch structure and ensure that each document contains the correct pages and is correctly classified.
Kofax Transformation Modules - Correction	A user interactive module that is used to review extraction results for individual fields and correct low confidence characters extracted with zonal OCR in a speed optimized environment.
Kofax Transformation Modules - Validation	A user interactive module that is used to review extraction results for an entire document and to ensure that all information is valid. Documents can also be marked for online learning.
Kofax Transformation Modules - Verification	A user interactive module that is used to double key critical data to ensure greater accuracy from extracted data.
Kofax Transformation Modules - Knowledge Base Learning Server	A module that performs online learning tasks to improve recognition based on validation input for documents with unsatisfactory extraction results.

 

3. Are there any important installation notes that should be considered before installing the Kofax Transformation Modules 4.0 product?

The following are important notes for installing Kofax Transformation Modules.

• Administrator Rights
  To install Kofax Transformation Modules, the logged-in user must be part of the Administrator group on the local machine.
• Install Kofax Capture First
  The Kofax Transformation Modules installation installs and registers custom Kofax Capture components only if a certified version of Kofax Capture (formerly Ascent Capture) is detected on the computer. Therefore, to use the custom Kofax Capture components, you must install a certified version of Kofax Capture before you install Kofax Transformation Modules.
• Close Applications
  Before installing Kofax Transformation Modules 4.0, you must close the Kofax Capture Administration module on every workstation.
• Upgrading Kofax Transformation Modules
  If you upgrade from an earlier version of Kofax Transformation Modules (formerly Ascent Xtrata Pro), you need to:
  • Remove the earlier version before installing Kofax Transformation Modules 4.0.
  • Ensure that any batches in the system have been processed, since this version contains major updates to the modules and statistics release script.
  • Remove the earlier version of the statistics release script from the Release Scripts window in the Kofax Capture Administration module, and reconfigure the new statistics release script. For details on how to do this, refer to the Kofax Transformation Modules Configuration Guide.
  • Upgrade any existing projects (recommended). The first time you open an earlier project in Project Builder, a list of “upgrade warnings” indicating how to make your project compatible with Kofax Transformation Modules 4.0 is displayed.

4. Are there any additional setup steps for the Kofax Transformation Modules 4.0 product that I need to be aware of?

Yes, you should be aware of the following additional setup steps.

The default recognition engine for Kofax Transformation Modules is the ABBYY ® Finereader ® 8.1 OCR engine. An additional recognition engine for Asian languages is available, but must be licensed separately.

For the installation of the additional recognition engine, a separate setup is provided on the Kofax Transformation Modules setup DVD.

The additional recognition engine KADMOS 4.2 ®, developed by re Recognition GmbH, is available as an option in the standard installation package of Kofax Transformation Modules, but must be licensed separately.

Note: Asian languages can be displayed only when these language options are installed for your Windows operating system.

5. How do I register Custom Modules or Release Scripts for use with the Kofax Transformation Modules 4.0 product?

The Kofax Transformation Modules installation program automatically registers the Kofax Capture modules and the statistics release script with Kofax Capture. If for any reason the custom components need to be registered after installation, you can manually register them in the Kofax Capture Administration module.

Note: An error message is displayed if the installation program fails to register the Kofax Transformation Modules custom components; the unregistered components are not available for use with Kofax Capture. For example, if the Kofax Transformation Modules - Validation module is not registered, it is not available as a queue for a batch class

To register custom modules:

1. From the Administration module menu bar, select Tools | Custom Module Manager to display the Custom Module Manager dialog box
2. Click Add to display the Open dialog box.
3. Select the desired Kofax Transformation Modules registration file from within the selected folder:
• KTM.aex to install Server, Server 2 and/or Knowledge Base LearningServer
• KTMCorrection.aex to install Correction
• KTMDocumentReview.aex to install Document Review
• KTMValidation1.aex to install Validation step 1
• KTMValidationN.aex to install Validation step N
• KTMVerification.aex to install Verification
4. Click Open to display the Custom Modules window.
5. Select the Kofax Transformation Modules component(s) from the list, and click Install.

To register release scripts

1. From the Administration module menu bar, select Tools | Release Script Manager to display the Release Script Manager dialog box.
2. Click Add to display the Open dialog box.
   1. Select the Kofax Transformation Modules registration file (MailroomStatisticRelease.inf) for the statistic release script from within the selected folder.
3. Click Open to display the Add Release Scripts window.
4. Select Kofax Transformation Modules - Statistics Release (KTM Statistics) from the list, and click Install.

6. How can I access the online help in the Kofax Transformation Modules 4.0 product?

Kofax Transformation Modules online help is available from the application components as follows:

• From any of the Kofax Transformation Modules components, click Help from the toolbar or select Help | Contents (or Index) from the menu bar. From any application window, click Help to display context sensitive help information for the window.
• Kofax Transformation Modules scripting Online Help is available from the Help menu of any Project Builder interface that allows you to write or access scripts. Select Help and then the desired help component.